Road solar street lights use solar energy as the power supply to provide nighttime road lighting. They are designed with high-efficiency Led Light sources and have the advantages of high brightness, green environmental protection, easy installation, stable and reliable operation, no cable laying, no consumption of conventional energy, and long service life. However, before using solar street lights, installation must be carried out first. However, as many consumers do not have much knowledge about the installation of solar street lights, they have even less understanding of the precautions for wiring solar street lights. Most light sources use LED products with tempered glass surfaces, which are also light-emitting ports. We need to pay attention to the cleanliness of their surfaces. When installing wiring, the lamp head will lead out two wires for the convenience of installation personnel. The wiring method may vary depending on the lamp head style, but the positive and negative poles are the same. When using adhesive tape to wrap it tightly, we should use our hands to slightly pull it to prevent it from falling off due to loose connection.
Solar Panels are fragile products, and customers cannot place heavy objects on them during installation. During installation, we need to be clear about the outlet ports behind the solar panel, which are generally divided into positive and negative poles (red, positive, black, and negative, all distinguished by color). When wiring, we need to pay attention to stripping the protective sheath wire. The multi strand copper wire used in solar street lights needs to be tightened when we use it, and there should be no exposed wire spikes. Improper operation may cause short circuits and burn out diodes.
When the colloidal battery for solar street lights is fully charged during use, we should wrap it tightly separately before stripping and installing it, so as not to cause the two positive and negative poles to come into contact and ignite due to improper operation. In addition, attention should be paid to the difference between the positive and negative poles during installation, and they should not be connected incorrectly (the difference between the positive and negative poles is very important in the installation of solar street lights).
