Solar street lights generate electricity on their own without the need for mains power supply, do not require pulling lines, and have no safety hazards such as high voltage leakage. They are very energy-saving and environmentally friendly, and have been widely loved by the public in recent years.
However, the operation mode of solar street lights is completely different from the traditional use of mains electricity. Solar street lights all use their own configured
Solar Street Light panels and solar
Street Light batteries to cooperate with each other, converting, storing, and releasing electrical energy to produce luminous output. Therefore, the configuration of solar street lights is particularly important, and how to achieve self-sufficiency in the electrical energy of solar street lights itself is a very important thing.
1. When designing and configuring solar street lights, the low power of the solar panel caused the battery to not be fully charged. At first, the performance was normal, but after a few rainy days, the lights began to dim, and in less than a year, they were completely black. This situation is quite common. Therefore, when configuring the solar panel, the selected power must be appropriate.
2. When designing and configuring solar street lights, the battery capacity may be too small, or the setting of the solar street light controller may not be in line with the local actual situation, resulting in a significant decrease in measurement after more than 3 rainy days. This situation is prone to problems during periods of frequent rainy days, while other times are normal. However, if the local rainy days often exceed the controller's setting, it will bring huge burden to the battery, causing premature aging and reduced lifespan. Therefore, when setting up the controller, we must carefully and accurately consider the local rainy days.
3. If the LED lamp head of a solar street light uses too much power, it may cause the battery to over discharge and age prematurely. If the power is too low, the brightness will be insufficient and unnecessary cost waste will occur. This situation is less likely to occur. Therefore, when choosing LED lamp heads for solar street lights, we also need to carefully select their power consumption.
In terms of
Solar Street Lamp configuration, it is necessary to first understand the lighting coefficient, road width, and street lamp height of the area. The height of the lamp post and the brightness of the lamp head should be suitable. The power used during each time period should be suitable for the general rainy and cloudy days in the area, and the capacity of the battery should be suitable. The power of the solar panel should be suitable for the storage capacity of the maintenance free battery.
